Deals for Ar-15/m16 Mut® Multi-Tool Leatherman Tool Group Inc. You can order Ar-15/m16 Mut® Multi-Tool Leatherman Tool Group Inc. after check, compare the values and check day for shipping. Some people are want to buy Ar-15/m16 Mut® Multi-Tool Leatherman Tool Group Inc. with the cheap price. While the item could be priced similarly at different shops.
Versatile multi-tool packs classic Leatherman features, plus specific tools for the military, law enforcement, civilian, and competition AR-15/M16 shooter. Not only will the MUT help you perform routine maintenance and adjustment tasks on the basic AR platform and popular accessories, it can literally save your life. In the event of a jam caused by “bolt override”—an ejection failure that traps the spent case between the bolt and charging handle—simply drop the mag, insert the MUT’s bolt override tool into the ejection port and yank the carrier quickly to the rear to clear. The non-marring bronze carbon scraper cleans all areas of the bolt/carrier assembly prone to carbon fouling buildup. Stainless steel 1⁄8" punch speeds removal of pivot/takedown and hammer/trigger pins. For adjusting optics and accessories, there’s a ¼" slot-head screwdriver, plus 7⁄64" hex, Torx® T-15, and Phillips #1/#2 drivers. The clip point knife blade of 420HC stainless steel has a precision-ground straight/serrated edge for maximum versatility. Blade can be deployed one-handed with the rest of the tool closed. Combination regular and needle-nose pliers include removable wire cutter jaws of hardened 154CM stainless that can be detached for replacement or sharpening. You also get a cutting hook for slicing cord, seat belts, zip ties, or disposable handcuffs. Other tools include a saw, flat hammer head, crimper, threaded adapter that accepts a standard cleaning rod, cable, or brush. The standalone 12-point wrench with ½" and 3⁄8" heads is ideal for tightening bolts on Picatinny rail accessory mounts. A carabiner clip helps you carry the tool and doubles as a bottle opener. Comes with a removable Titanium pocket clip and MOLLE compatible nylon belt sheath.
SPECS: Stainless steel, black oxide finish. 5" (12.7cm) OAL folded, 7¾" (19.7cm) OAL opened. 3" (7.6cm) long knife blade. 10.9 oz (309g) wt. Includes nylon belt sheath in black or brown, plus ½" and 3⁄8" 12-point wrench.
Cold-rolled steel lapping tool chucks into a 3/8" hand drill to easily “square” the upper receiver face on your AR-15. Helps ensure precise mating of barrel and receiver for added accuracy. Coat face of receiver with aluminum-oxide lapping compound; extra long pilot slides into the bolt carrier tunnel to maintain perfect concentricity with the receiver.
Handy all-in-one tool handles the tasks necessary to build and maintain your AR-15 or M16. It's a barrel nut wrench, muzzle device wrench, spanner wrench, forearm wrench, flat tip screwdriver, A2 tube remover, receptacle for ½" drive/torque wrench - and a bottle opener. Long handle give plenty of leverage for buttstock and barrel removal/installation, and the ½" drive receptacle allows the use of a torque wrench, so you can get things tightened down correctly. It even has a flat face on one side that can be used as a hammer.
SPECS: Heat treated alloy steel, matte olive drab powder coat finish.
The Sinclair Vise Block is the perfect tool for securely holding your AR-15/AR-10® in a bench vise. The Vise Block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The Vise Block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. AR-10® Model only fits Armalite® AR-10® pattern rifles, does not fit DPMS/SR25 pattern rifles.
Specially made, slab-sided punch clears left side of the magazine well allowing bolt catch pivot pin to be removed by driving it to the rear.
Save time and money by providing repeatable setup, accurate, measurable adjustments and suitability for many guns. Fixture has built-in hammer and trigger/sear alignment pin holes for seven popular guns, plus an adapter for working on one additional gun model of your choice. Purchase more adapters separately for other guns; many jigs combined in one fixture! To use, mount hammer or trigger/sear on adapter, set and lock at correct index mark as instructed. Set stoning angle by counting “clicks” specified to raise or lower elevator and stoning guide. Lock guide, place stone on both roller and hammer or trigger/sear, and stone as normal. Easily adjustable to allow variations in stoning angle for exact, desired trigger pull weight. Same tool Ron Power uses in his own shop. Complete with one adapter and very detailed instructions written by Ron. You will also need a #10 Machinist’s Clamp and 6"x½"x½" stones (listed elsewhere). ab
SPECS: Blued steel. 5 9⁄16" (14.1cm) long x 2 9⁄16" (6.5cm) wide x 3" (7.6cm) high. 3⁄4" (19mm) thick base. 5 3⁄4 lb. (2.6 kg). Inc
Big, tough, polyethylene block gives fitted support for installing/removing the front sight assembly on mil-spec, AR-15 rifles and carbines. Precision-machined and clearly marked on both sides for driving the mounting pins “IN” or “OUT” of the sight. Accommodates the sling swivel, plus, includes provisions for removing the gas tube roll pin.
SPECS: Polyethylene, orange. 4" (10.2cm) dia. x 1-11/16" (4.3cm) high.
Our bolt vise helps you disassemble your AR-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. NOTE: We recommend you replace the ejector spring pin when reassembling if you have one available. A one sixteenth of an inch punch is required to remove the pin.
Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers.
Precision tooling for blueprinting Remington and Winchester actions.
SPECS: For use with Remington 700 short and long action, Winchester 70 Classic, short and long action. .010" Over Kit - Includes .010" over Receiver Reamer, 1-1/16" +.010"-16 tap, .010" over Recoil Lug Reamer, (2) bushings. Standard Kit - Includes Standard Receiver Reamer, 1-1/16"-16 tap, (2) bushings; doesn’t include Recoil Lug Reamer.
Thank you for a prompt, professional transaction - all good!! Many thanks :-)
Excellent transaction , superb piece, hightly recommanded , Thanks
The Ar-15/m16 Mut® Multi-Tool Leatherman Tool Group Inc. are gorgeous and shipping was prompt. I would definitely shop this shop again!
Fast Shipping. Thanks!
Thank you for being so kind and prompt with shipping.