If you find product , Deals.If at the time will discount more Savings So you already decide you want have Car-15/m4 Buttstock Wrench Brownells for your, but you don't know where to get the best price for this Car-15/m4 Buttstock Wrench Brownells . We already done the research and spend a lot of time for you. Car-15/m4 Buttstock Wrench Brownells to find out where to get the best deal on Car-15/m4 Buttstock Wrench Brownells.
Dedicated wrench has four precision-machined teeth that ensure full, non-slip engagement of all four notches in an M4-type receiver extension nut for easy removal and installation of collapsible carbine buttstocks. Transfers all the torquing force to the nut for fast tightening or removal without risk of damage to nut, extension tube, or receiver caused by the wrench slipping. Includes the handy add-on features of our universal M4 buttstock tool: pry blade/screwdriver, ½" square torque drive opening, fixed stock receiver extension remover, and a convenient hole in the handle for hanging the wrench on a pegboard. Heavy duty steel construction, machined from a single piece of .312” thick steel, with a durable black oxide finish.
SPECS: Steel, hardened, black oxide finish. 7-1⁄8" (18.1cm) long. Fits current-model M4-type receiver extension nuts with four square notches.
The Geissele Reaction Block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube onto the lower; the buffer tube and lower receiver assembly can be slid into the Reaction Block at the 12, 3, 6 and 9 o’clock positions. This allows the armorer to rotate the lower in 90 degree increments in the block simply by loosening the provided nylon screws, removing the lower, and sliding it back in at the desired orientation. The Reaction Block provides an ultra-stable platform for performing an array of lower receiver operations, as well as making the installation of the buffer retainer nut quick and easy. All while keeping both hands of the armorer free to work, saving both time and frustration.
Heavy-duty vise block takes all the clamping force, so your expensive lower receiver won’t get scratched, distorted, or otherwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Double-ended design fits ArmaLite® AR-10®, Bushmaster .308, DPMS Panther™ LR-308, and Remington R-25. Does not fit Rock River Arms lower receivers. Machined from rugged, durable, chemical-resistant Delrin® polymer; will not mar or scratch weapon’s finish.
SPECS: Machined Delrin, white. 5-1⁄8” (13cm) high, 3” (7.6cm) wide, 1” (2.5cm) thick. Fits most AR-Style .308 rifles except Rock River Arms.
Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don't back out under the most strenuous rapid-fire conditions. Eliminates the hassle of trying to stake the screws with a hammer and punch that could slip and damage the key, screws, or carrier. Holds carrier securely and positions the key so it can be dimpled in the correct locations by tightening the four hex screws on the tool. An additional retaining screw on top of the tool prevents the carrier from moving. The tip of this screw is machined flat to make sure it applies even retaining force and won't mar the carrier. All screw tips are hardened to Rc 58-62 for durability; however, sometimes screws will break, so we offer a 4-pak of replacement screws.
SPECS: 1018 carbon steel, black oxide finish. 3” (7.62cm) long, 2” (5.1cm) wide, 2” high.
The Super Reaction Rod was designed to fulfill the need of an advanced armorer who frequently works on AR-15/M4 platforms with over torqued, seized or Loctited barrel nuts. The Super Reaction Rod works by pre-loading the barrel extension lugs to the lugs of the Super Reaction Rod to eliminate movement created by adding torque to the barrel nut while at the same time fixing the upper receiver in place. Having the barrel extension mated t...o the Super Reaction Rod lugs and fixing the upper receiver before torqueing will remove stress that could be placed on the index pin. This allows the armorer to place tremendous torque on the barrel nut to assist in breaking seized nuts loose. The Super Reaction Rod’s pre-loading system can also be removed to allow it to work just like a standard Reaction Rod, which allows upper work to be performed in a 360° both vertically, and horizontally.
Improved variation of the original G.I. tool turns a three- handed job into a quick, easy- to-perform operation. Two-position handle provides extra leverage to cam the bolt forward and retain the entire bolt while depressing the ejector. Extractor lifts out and drops in easily while other parts stay put.
Presents a quick and accurate indication of barrel/throat wear. Use every 1,000 rounds to obtain a comparative reading of throat erosion. Provides match shooters and varmint hunters an easy, convenient method to determine remaining barrel life. Models for rifles chambered in .223, .30 M1 Carbine, and .30-06 M1 Garand. The other end of the Garand gauge is calibrated to measure bore erosion at the muzzle.
SPECS: Steel. Includes complete instructions. .223 - Also fits .222 and .22-250. 3½" (8.9cm) long. .30 M1 Carbine - 21⁄16" (5.2cm) long. .30-06 M1 Garand – 5" (12.7cm) long.
Hardened steel tool enables fast, easy, precise windage and elevation adjustment on a wide variety of Kalshnikov-type rifles. The full-circle clamp is far stronger than generic C-clamps for secure, positive contact with the sight tower to adjust the sight for windage. Viewing port in the circle clamp gives you a clear view of the drum for perfect alignment. Remove the T-handle from the circle clamp and use it as a wrench to adjust the sight post for elevation. Sliding handle lets you select the length that gives you the right amount of leverage in either mode to get even a “frozen” sight to move. No extra tools required. Standard model fits AK-47 and clones. Gunsmith model has a larger circle clamp to fit all sizes of front sights, and a longer handle for extra torque to move the stubbornest sight.
SPECS: Steel. Fits AK-47, AKM, AK-74, RPK-47/-74, commercial Saiga rifles, and most Eastern Bloc AK variants and clones. Standard – 1¾" (4.4cm) O.D., ¾ " (cm) thick, with 4½" (11.4cm) long handle. Gunsmith – 2¼" (5.7cm) O.D., 1" (2.5cm) thick, with 6½" (16.5cm) long handle.
Steel, dual function wrench lets you easily remove your old extension tube and install a new-style, A4 stock. Spanner has three lugs to fit the A4-style castle nut. Provides a non-slip fit so you can hand tighten the castle nut to the receiver. Also, the comfortable, rubber coated handle features a cutout to fit the receiver extension tube to remove the A1 or A2 stock.
SPECS: Steel, parkerized finish. 7-5/8" (19.3cm) long.
Makes installation of the M16 pivot pin and its detent faster and easier. Prevents loss of detents. Guides detent and spring into place and serves as a slave pin when installing the pivot pin.