Web Analytics Made Easy -
StatCounter

 Sinclair Ar-15 Bolt Vise Sinclair International will be the best commodities presented this week. Since telling its unequalled pregnancy, improved also at this point accommodated simply no greater than without help. Then on-line an extensive offering of items it’s achievable acquire. The entirely service or product is made by employing special things which somewhat include fantastic and also fashion. Sinclair Ar-15 Bolt Vise Sinclair International is usually a preferent choose many of us. In addition to I SIMPLY passionately propose it. With all the external highly rated touchstones, thus recognizing the product the posh or perhaps and in addition durable. While many persons love the Sinclair Ar-15 Bolt Vise Sinclair International since a great many features of colorings, heroes, resources.

 
 
Content:

Sinclair Ar-15 Bolt Vise Sinclair International.

$23.99
Our bolt vise helps you disassemble your AR-15 bolt easily and without losing any parts. The main function of the tool is to ...

Product Description

Our bolt vise helps you disassemble your AR-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. NOTE: We recommend you replace the ejector spring pin when reassembling if you have one available. A one sixteenth of an inch punch is required to remove the pin.


AR-15, Issue:11, Page:087
Big Book Catalog, Issue:71, Page:090
Sinclair, Issue:5B, Page:248

Ar-15 Upper Receiver Block Dpms.

$39.99 - $71.99
Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits ...

Product Description

Secure Support For Receiver While Fitting Parts

Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers.


AR-15, Issue:11, Page:085
Big Book Catalog, Issue:71, Page:088
SPECS: Nylon, white. AR-15 - 7” (17.8cm) long, 1¾” (4.5cm) wide, 2-7⁄8" (7.3cm) high. DPMS .308 - 7-3⁄8" (18.7cm) long, 1-7⁄8" (4.8cm) wide, 3” (7.6cm) high. Fits DPMS Panther AR-style .308 receivers.

Receiver Accurizing System Manson Precision.

$580.99 - $607.99
Precision tooling for blueprinting Remington and Winchester actions.

Product Description

A Real Time & Work Saver When Blueprinting Actions

Precision tooling for blueprinting Remington and Winchester actions.


Big Book Catalog, Issue:71, Page:465

SPECS: For use with Remington 700 short and long action, Winchester 70 Classic, short and long action. .010" Over Kit - Includes .010" over Receiver Reamer, 1-1/16" +.010"-16 tap, .010" over Recoil Lug Reamer, (2) bushings. Standard Kit - Includes Standard Receiver Reamer, 1-1/16"-16 tap, (2) bushings; doesn’t include Recoil Lug Reamer.


Ar-15/m16/ 308 Ar Gas Tube Wrench Mark Brown Custom.

$35.99
Clamps around those fragile, easy-to-bend gas tubes to prevent damage during both removal and installation and adds a convenient handle.

Product Description

Protects Tube From Crushing During Installation & Removal

Clamps around those fragile, easy-to-bend gas tubes to prevent damage during both removal and installation and adds a convenient “handle.”


AR-15, Issue:11, Page:082
AR-15, Issue:11, Page:083
AR-15, Issue:11, Page:089
Big Book Catalog, Issue:71, Page:084
Big Book Catalog, Issue:71, Page:085
Big Book Catalog, Issue:71, Page:092

SPECS: Steel, blued. Approximately 6" (15.2cm) long.


Car-15/m4 Buttstock Wrench Brownells.

$79.99
Dedicated wrench has four precision-machined teeth that ensure full, non-slip engagement of all four notches in an M4-type receiver extension nut for easy ...

Product Description

Solidly Engages The Receiver Extension Nut For Easy Installation & Removal Of Carbine Buttstocks

Dedicated wrench has four precision-machined teeth that ensure full, non-slip engagement of all four notches in an M4-type receiver extension nut for easy removal and installation of collapsible carbine buttstocks. Transfers all the torquing force to the nut for fast tightening or removal without risk of damage to nut, extension tube, or receiver caused by the wrench slipping. Includes the handy add-on features of our universal M4 buttstock tool: pry blade/screwdriver, ½" square torque drive opening, fixed stock receiver extension remover, and a convenient hole in the handle for hanging the wrench on a pegboard. Heavy duty steel construction, machined from a single piece of .312” thick steel, with a durable black oxide finish.


AR-15, Issue:11, Page:083
Big Book Catalog, Issue:71, Page:086

SPECS: Steel, hardened, black oxide finish. 7-1⁄8" (18.1cm) long. Fits current-model M4-type receiver extension nuts with four square notches.


Ar-15/m4 Reaction Block Geissele Automatics Llc.

$87.99
The Geissele Reaction Block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube ...

Product Description

The Geissele Reaction Block is designed to aid in the assembly of lower receivers. Once the armorer has installed the buffer tube onto the lower; the buffer tube and lower receiver assembly can be slid into the Reaction Block at the 12, 3, 6 and 9 o’clock positions. This allows the armorer to rotate the lower in 90 degree increments in the block simply by loosening the provided nylon screws, removing the lower, and sliding it back in at the desired orientation. The Reaction Block provides an ultra-stable platform for performing an array of lower receiver operations, as well as making the installation of the buffer retainer nut quick and easy. All while keeping both hands of the armorer free to work, saving both time and frustration.


308 Ar Lower Receiver Vise Block Brownells.

$45.99
Heavy-duty vise block takes all the clamping force, so your expensive lower receiver won’t get scratched, distorted, or otherwise damaged. Insert block into ...

Product Description

Protects Receiver From Damage When Clamping In Vise

Heavy-duty vise block takes all the clamping force, so your expensive lower receiver won’t get scratched, distorted, or otherwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Double-ended design fits ArmaLite® AR-10®, Bushmaster .308, DPMS Panther™ LR-308, and Remington R-25. Does not fit Rock River Arms lower receivers. Machined from rugged, durable, chemical-resistant Delrin® polymer; will not mar or scratch weapon’s finish.


AR-15, Issue:11, Page:085
Big Book Catalog, Issue:71, Page:088
Sinclair, Issue:4S, Page:023

SPECS: Machined Delrin, white. 5-1⁄8” (13cm) high, 3” (7.6cm) wide, 1” (2.5cm) thick. Fits most AR-Style .308 rifles except Rock River Arms.


Ar-15/m16 Carrier Key Staking Tool Brownells.

$13.99 - $69.99
Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don't back out under ...

Product Description

Fast, Foolproof Staking Without Damaging Key, Screws, Or Carrier

Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don't back out under the most strenuous rapid-fire conditions. Eliminates the hassle of trying to stake the screws with a hammer and punch that could slip and damage the key, screws, or carrier. Holds carrier securely and positions the key so it can be dimpled in the correct locations by tightening the four hex screws on the tool. An additional retaining screw on top of the tool prevents the carrier from moving. The tip of this screw is machined flat to make sure it applies even retaining force and won't mar the carrier. All screw tips are hardened to Rc 58-62 for durability; however, sometimes screws will break, so we offer a 4-pak of replacement screws.


AR-15, Issue:11, Page:087
Big Book Catalog, Issue:71, Page:090

SPECS: 1018 carbon steel, black oxide finish. 3” (7.62cm) long, 2” (5.1cm) wide, 2” high.


Ar-15/m4 Super Reaction Rod Geissele Automatics Llc.

$146.99
The Super Reaction Rod was designed to fulfill the need of an advanced armorer who frequently works on AR-15/M4 platforms with over ...

Product Description

The Super Reaction Rod was designed to fulfill the need of an advanced armorer who frequently works on AR-15/M4 platforms with over torqued, seized or Loctited barrel nuts. The Super Reaction Rod works by pre-loading the barrel extension lugs to the lugs of the Super Reaction Rod to eliminate movement created by adding torque to the barrel nut while at the same time fixing the upper receiver in place. Having the barrel extension mated t...o the Super Reaction Rod lugs and fixing the upper receiver before torqueing will remove stress that could be placed on the index pin. This allows the armorer to place tremendous torque on the barrel nut to assist in breaking seized nuts loose. The Super Reaction Rod’s pre-loading system can also be removed to allow it to work just like a standard Reaction Rod, which allows upper work to be performed in a 360° both vertically, and horizontally.


M1/m14 Bolt Disassembly Tool Brownells.

$59.99
Improved variation of the original G.I. tool turns a three- handed job into a quick, easy- to-perform operation. Two-position handle provides extra leverage ...

Product Description

Cradles & Secures Entire Bolt

Improved variation of the original G.I. tool turns a three- handed job into a quick, easy- to-perform operation. Two-position handle provides extra leverage to cam the bolt forward and retain the entire bolt while depressing the ejector. Extractor lifts out and drops in easily while other parts stay put.


Big Book Catalog, Issue:71, Page:465
SPECS: Aluminum body, steel handled. 4¾" (12cm) long, 1"(2.5cm) wide. Fits both M1 Garand and M14 bolts.

  1. These handles are just as described and shipping was fast. Seller was prompt to respond to my questions.

  2. Great Sinclair Ar-15 Bolt Vise Sinclair International condition and fast ship. Glad to have room to let out but otherwise nothing else needed. Thank you. KLH

  3. Excellent transaction , superb piece, hightly recommanded , Thanks

  4. The seller was very pleasant to deal with and the Sinclair Ar-15 Bolt Vise Sinclair International! Shipping was done very expeditiously, arriving within a few days of purchase.''

  5. part of a unique gift

  6. Again, loved the quality and look of these Sinclair Ar-15 Bolt Vise Sinclair International. Stunning. Would repurchase from this shop again. Super quick shipping.

  7. This is a beautiful piece of Sinclair Ar-15 Bolt Vise Sinclair International and I am so happy with it. The level of customer service from the seller was fantastic. I had a question about shipping and the response was immediate. I cannot recommend this seller enough.

  8. Sinclair Ar-15 Bolt Vise Sinclair International Stunning piece from a lovely seller

  9. Very nice as described. Thank you!

  10. Sinclair Ar-15 Bolt Vise Sinclair International FAST shipping, excellent condition, very happpppppy! Made an beautiful Mothers Day Gift! Thank you and highly recommend.

  11. Such a pleasure to purchase from you.Just incredible

  12. exactly what I was looking for. Thank you

  13. Sinclair Ar-15 Bolt Vise Sinclair International Thanks so much.

  14. Sinclair Ar-15 Bolt Vise Sinclair International wonderful, unique and special necklace!! so

  15. Beautiful & fast shipping. Sinclair Ar-15 Bolt Vise Sinclair International.. Thanks! Buy At www.brownells.com

  16. GOOD. An amazing Product the shop and they replaced it immediately! Very good quality and customer service! Overall, very happy and satisfied!

  17. Sinclair Ar-15 Bolt Vise Sinclair International Thanks so much.

  18. My item shipped out super quick!

View more all comments ...

Leave a Reply