Ar-15/m16 Upper Receiver Lapping Tool Brownells is best in online store. I will call in short word as Ar-15/m16 Upper Receiver Lapping Tool Brownells For people who are searching for Ar-15/m16 Upper Receiver Lapping Tool Brownells review. We've more info about Detail, Specification, Customer Reviews and Comparison Price. I recommend that you always check the latest price before buying.
Check Prices and intensely beautiful Ar-15/m16 Upper Receiver Lapping Tool Brownells . and web store for each and every occasion. Order now for the crowning custom of Ar-15/m16 Upper Receiver Lapping Tool Brownells with shop nearby your home. You can take this item with low-priced price from online shopping web site. Much more customer reviews tell that the Ar-15/m16 Upper Receiver Lapping Tool Brownells are good quality item and it is also reasonably priced. You cansecureAr-15/m16 Upper Receiver Lapping Tool Brownells on-line shopping store. Prior to achieve you can verify for price, shipping price and more.
Cold-rolled steel lapping tool chucks into a 3/8" hand drill to easily “square” the upper receiver face on your AR-15. Helps ensure precise mating of barrel and receiver for added accuracy. Coat face of receiver with aluminum-oxide lapping compound; extra long pilot slides into the bolt carrier tunnel to maintain perfect concentricity with the receiver.
Handy all-in-one tool handles the tasks necessary to build and maintain your AR-15 or M16. It's a barrel nut wrench, muzzle device wrench, spanner wrench, forearm wrench, flat tip screwdriver, A2 tube remover, receptacle for ½" drive/torque wrench - and a bottle opener. Long handle give plenty of leverage for buttstock and barrel removal/installation, and the ½" drive receptacle allows the use of a torque wrench, so you can get things tightened down correctly. It even has a flat face on one side that can be used as a hammer.
SPECS: Heat treated alloy steel, matte olive drab powder coat finish.
The Sinclair Vise Block is the perfect tool for securely holding your AR-15/AR-10® in a bench vise. The Vise Block inserts into your magazine well just like a magazine and the bottom half of the block can be clamped into a vise. You can tilt the block in the vise to work at a different angle if desired. You can also insert the vise block into the top of the lower assembly allowing you to work on the bottom side. The Vise Block is made of machined high density polyethylene, so it is extremely solid. Great workbench tool. AR-10® Model only fits Armalite® AR-10® pattern rifles, does not fit DPMS/SR25 pattern rifles.
Specially made, slab-sided punch clears left side of the magazine well allowing bolt catch pivot pin to be removed by driving it to the rear.
Save time and money by providing repeatable setup, accurate, measurable adjustments and suitability for many guns. Fixture has built-in hammer and trigger/sear alignment pin holes for seven popular guns, plus an adapter for working on one additional gun model of your choice. Purchase more adapters separately for other guns; many jigs combined in one fixture! To use, mount hammer or trigger/sear on adapter, set and lock at correct index mark as instructed. Set stoning angle by counting “clicks” specified to raise or lower elevator and stoning guide. Lock guide, place stone on both roller and hammer or trigger/sear, and stone as normal. Easily adjustable to allow variations in stoning angle for exact, desired trigger pull weight. Same tool Ron Power uses in his own shop. Complete with one adapter and very detailed instructions written by Ron. You will also need a #10 Machinist’s Clamp and 6"x½"x½" stones (listed elsewhere). ab
SPECS: Blued steel. 5 9⁄16" (14.1cm) long x 2 9⁄16" (6.5cm) wide x 3" (7.6cm) high. 3⁄4" (19mm) thick base. 5 3⁄4 lb. (2.6 kg). Inc
Big, tough, polyethylene block gives fitted support for installing/removing the front sight assembly on mil-spec, AR-15 rifles and carbines. Precision-machined and clearly marked on both sides for driving the mounting pins “IN” or “OUT” of the sight. Accommodates the sling swivel, plus, includes provisions for removing the gas tube roll pin.
SPECS: Polyethylene, orange. 4" (10.2cm) dia. x 1-11/16" (4.3cm) high.
Our bolt vise helps you disassemble your AR-15 bolt easily and without losing any parts. The main function of the tool is to compress the ejector so you can remove the spring pin easily. This enables you to release the pressure on the ejector slowly so the ejector and spring don't go flying off your workbench. The ejector and spring can be replaced if needed and the bolt reassembled easily. The tool cradles the bolt and holds it firmly in place while the screw assembly compresses the ejector. A hole in the vise allows the pin to drop free. The tool can also be used to hold the bolt securely while replacing gas rings and replacing the extractor. NOTE: We recommend you replace the ejector spring pin when reassembling if you have one available. A one sixteenth of an inch punch is required to remove the pin.
Machined from tough, long-wearing nylon to hold upper receiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers.
Precision tooling for blueprinting Remington and Winchester actions.
SPECS: For use with Remington 700 short and long action, Winchester 70 Classic, short and long action. .010" Over Kit - Includes .010" over Receiver Reamer, 1-1/16" +.010"-16 tap, .010" over Recoil Lug Reamer, (2) bushings. Standard Kit - Includes Standard Receiver Reamer, 1-1/16"-16 tap, (2) bushings; doesn’t include Recoil Lug Reamer.
Clamps around those fragile, easy-to-bend gas tubes to prevent damage during both removal and installation and adds a convenient “handle.”
SPECS: Steel, blued. Approximately 6" (15.2cm) long.