Web Analytics Made Easy -
StatCounter

"Today, if you do not want to disappoint, Check price before the Price Up.Barrel Bedding Tool Gunline You will not regret if check price."  who sells Barrel Bedding Tool Gunline the cheapest

Content:

Barrel Bedding Tool Gunline.

$19.99 - $187.99
Perfect, chatter-free cut, shaves out excess wood, leaves barrel channel smooth and ready for barrel without gouging, rasping or final sanding. Cushioned-cutter design ...

Product Description

Full Control Of Cutting Head At All Times With All Cuts

Perfect, chatter-free cut, shaves out excess wood, leaves barrel channel smooth and ready for barrel without gouging, rasping or final sanding. Cushioned-cutter design keeps hardened steel cutter discs at correct angle to remove wood without "digging in" regardless of amount of pressure. A favorite with pros.


Big Book Catalog, Issue:71, Page:412
SPECS: 10" (25.4cm) overall. Cut length approximate 1¼" (3.2cm). 7/8" and 1" diameter replacement cutters are sold 9 per pak, all other sizes are sold 11 per pak. Bbl. Bedding Tool Set includes ½", 9/16", 5/8", 11/16" and ¾" bedding tools complete with handles and cutters.

Patternmakers&039; Cabinet Rasps Apex Tool Group.

$56.99 - $67.99
The famous Nicholson Shoemakers' and Patternmakers' Cabinet Rasps made especially for wood filing where a smooth finish is desired. Comes in two cuts, ...

Product Description

Favorite Of Professional Stockmakers For Shaping & Finishing

The famous Nicholson Shoemakers' and Patternmakers' Cabinet Rasps made especially for wood filing where a smooth finish is desired. Comes in two cuts, second or smooth, 10" long cutting surface. Rasp is half-round shape, but slightly wider than usual with wider radius also. Edges are cut (have teeth) and taper slightly from tang to front. We have been looking for these for many years at the suggestion of many, many good gunsmith and stockmaker customers and friends. The unusual tooth design eliminates most "filling" problems, does not gouge into wood or snag cross-grain. Probably the most useful wood rasp for "almost final" shaping and finishing. Teeth are coarser than the Wood Files.


Big Book Catalog, Issue:71, Page:412
Big Book Catalog, Issue:71, Page:440
SPECS: 12-5/8" (19.0cm) overall length. 7/8" (22.2mm) wide, tapers to 7/16' (11.1mm). #49 is second cut, #50 is smooth cut.

Stock Inletting Tools Royal Arms.

$17.99 - $76.99
Use to finish an inletting job where tiny amounts of material must be removed. Great anytime you need to remove precise amounts of ...

Product Description

Removes Thin Cuts Of Wood In Very Tight Places

Use to finish an inletting job where tiny amounts of material must be removed. Great anytime you need to remove precise amounts of wood from tight or curved recesses. Made from 1095 carbon steel, then hardened and heat treated to hold an edge, but still be easy to sharpen. Comfortable handle cuts down on hand fatigue. Chisels cut a thin shaving of wood from around triggerguard or rear tang recesses without chipping or tearing the stock. Scrapers get into tight recesses, remove just the right amount of wood.


Big Book Catalog, Issue:71, Page:412
SPECS: Steel shaft and blade, wood handle. 7-1/2" (19cm) overall length. Chisels available in right-or left-hand cut. Width: Straight and Curved scrapers .473" (12mm), Cobra Head .30" (7.7mm) wide. Set includes one each of 5 tools.

Octagon Barrel Bedding Tool Gunline.

$22.99 - $55.99
Rubber mounted, chatter-free cutters, shave out excess wood without digging in. Leaves barrel channel smooth and ready for barrel, without gouging, rasping or ...

Product Description

Cuts Channel To Final Size; Saves Hours Of Hand Work

Rubber mounted, chatter-free cutters, shave out excess wood without "digging in". Leaves barrel channel smooth and ready for barrel, without gouging, rasping or final sanding. A real time and work saver. Cushioned cutter design keeps hardened steel cutter discs at correct angle to remove wood regardless of amount of pressure. A single blade can be secured to handle for final touch-up.


Big Book Catalog, Issue:71, Page:412
SPECS: 8½" (21.6cm) overall. Cut length approximately ½" (12.7mm). Bedding tool complete with handle, three cutters, screws and pins.

Barrel Bedder Jr Gunline.

$15.99 - $66.99
Gunline's unique, no-chatter disc cutting system on an inletting rasp-style handle. Rubber cushioned cutter discs. Smooth, shaving-type cut.

Product Description

Precise "Shaving" Cutters & Rasp Handle For Close-In Work

Gunline's unique, no-chatter disc cutting system on an inletting rasp-style handle. Rubber cushioned cutter discs. Smooth, shaving-type cut.


Big Book Catalog, Issue:71, Page:412
SPECS: Steel shank and cutters, wooden handle, 9" (22cm) long. Set includes 1 handle and 3 sizes of cutter paks, 1/2" (12.7mm), 5/8" 15.9mm) and 3/4" (19.0mm) diameter. 6 cutters per pak.

Hard Fit Curl Scrapers Brownells.

$25.99 - $129.99
Made to remove the tiniest possible curl of wood to get that exact fit that separates Pros from duds. Handles are placed at ...

Product Description

For That Final, "Like It Grew There" Fit

Made to remove the tiniest possible curl of wood to get that exact fit that separates "Pros" from "duds". Handles are placed at right angles to the cutting edge; you get complete control of the edge and almost no tendency to follow wood grain, gouge or dig in.

Made of best quality tempered tool steel, with enough heft to eliminate any "flexing". Shaped for positive fingertip control of blade thru full stroke. Finger clearance under the handle for tight places. Available in 2 styles - 3 blade widths. Sizes small enough for trigger hole; big enough for barrel channel. Flat ones perfect for fitting floor plates, tangs, magazines.

Not intended to rough out barrel channel, so don't bear down. Just draw toward you across work. Makes the most beautiful curls and dust; yet won't work-harden wood as do rasps, or leave grit to ruin tool edges as does sandpaper. Without a doubt, the best tool ever designed for the fine, controlled removal of the inletting black and that "whisker" of wood underneath!


Big Book Catalog, Issue:71, Page:412
SPECS: Two styles: Curved and Straight, 3 sizes: ¼" (6.3cm), 3/8" (9.5cm), ½" (12.7mm). Set includes one of each.

Wood Stippling Punches Brownells.

$25.99
Create a no-slip gripping surface on a stock, forend or handgun grip in far less time than it takes to lay out and ...

Product Description

Fast Alternate To Checkering

Create a no-slip gripping surface on a stock, forend or handgun grip in far less time than it takes to lay out and checker an area. Sharply pointed cutting diamonds in 12, 16 or 20 lines per inch let you choose from coarse, medium or fine patterns.


Big Book Catalog, Issue:71, Page:409
SPECS: Steel, blued. 3/8" (9.5mm) diameter. 5" (12.7cm) long.

Scrapers Jerry Fisher.

$17.99
Famous stockmaker Jerry Fisher says: In 20 years of stockmaking this is the best inletting scraper I have ever used, and I have ...

Product Description

Used For Over 20 Years By One Of The Best

Famous stockmaker Jerry Fisher says: "In 20 years of stockmaking this is the best inletting scraper I have ever used, and I have tried a few. Just hold like a pencil and work from right to left, or left to right, depending on the direction of the wood grain." Precision-ground from tough alloy tool steel, sharpened and ready to use. Instructions included. Three tools, each with two different sized heads. Measurements given are cutting head sizes.


Big Book Catalog, Issue:71, Page:411
SPECS: Large, 1" (2.5cm) and ¾" (19.0mm). Small, 5/8" (15.9mm) and ½" (12.7mm). Octagon, 1" (2.5cm) and 11/16" (17.5mm).

No-Clog Files Apex Tool Group.

$35.99 - $39.99
Covers every operation from rough shaping to final contouring of combs, grip areas. With heavy pressure, the wood rolls off at an incredible ...

Product Description

Superb For Shaping Wood

Covers every operation from rough shaping to final contouring of combs, grip areas. With heavy pressure, the wood rolls off at an incredible rate. For finish work, the weight of the file alone will make "sawdust" cuts. Fine sanding is usually all that's necessary (cuts smooth cross grain, too)! Hold at a 60° angle to edges (butt, cheekpiece, etc.). Unusual, no-clog design.


Big Book Catalog, Issue:71, Page:411
Big Book Catalog, Issue:71, Page:440
SPECS: Flat - 12 tpi, 10" (25.4cm) long, 1" (2.5cm) wide; Half- Round/Flat - 14 tpi, 8" (20.3cm) long, 23/32" (18.3mm) wide.

Half-Round Vulcanite File Grobet File Co. Of America Inc.

$53.99
We've had lots of calls wanting us to find this file - and once you've tried it, you'll know why. Gives you ...

Product Description

4 Cutting Faces In One File

We've had lots of calls wanting us to find this file - and once you've tried it, you'll know why. Gives you 4 different cutting faces: half-round bastard, flat bastard, half-round 2nd cut and flat 2nd cut. Because of special shape, you can get into places easily where a square-ended file just won't fit. Fantastic for shadowline cheekpieces, shaping combs or schnables, inletting bolt knobs, around the wrist, tang and grip. Great on hard rubber, soft metals, plastics and wood.


Big Book Catalog, Issue:71, Page:411
Big Book Catalog, Issue:71, Page:439

SPECS: 8" (20.3cm) long. 1/2" (12.7mm) wide and tapers to 1/8" (3.2mm) at the points.


  1. My item shipped out super quick!

  2. exactly what I was looking for. Thank you

  3. Fast shipping, great communication!!!!!

  4. This is a beautiful piece of Barrel Bedding Tool Gunline and I am so happy with it. The level of customer service from the seller was fantastic. I had a question about shipping and the response was immediate. I cannot recommend this seller enough.

  5. Barrel Bedding Tool Gunline Great seller, awesome quality, perfect seat...

  6. Wow, what a fabulous lot! And a really great vendor- extremely responsive, answers questions quickly and completely, fabulous to deal with. Thank you!

View more all comments ...

Leave a Reply