"Today, if you do not want to disappoint, Check price before the Price Up.Light Mount Viking Tactics You will not regret if check price." affordable Light Mount Viking Tactics
Consistent with the VTAC Mission, the Viking Tactics Light Mount was designed for today’s modern warriors- providing a light-weight and versatile option to mount a flashlight onto any Picatinny rail system. Made of a Modified Acrylic PVC Alloy Thermoplastic with high impact and abrasion resistant qualities which have been proven to withstand the harshest environments, the Viking Tactics Light Mount is designed so that you can mount your light so that it is out of your field of view and easily activated.
This new and improved version of the original VTAC Light Mount Design gives you enormous flexibility. It will allow you to mount most lights with a .80 or 1” diameter and will fit the VTAC-L4 as well as the inexpensive Surefire G2 Nitrolon, Executive Series, and many others. The sleek VTAC design even offers a position in the insert to accommodate the clip on the light. Depending on your mounting preferences, the VTAC can be mounted in such a way that the light can be activated using a tape switch or it can be mounted in such a manner allowing you activate your light using the push button on the back of the light. (Note: Flashlights and firearms not included and must be purchased separately).
The VTAC Light Mount is impervious to most chemicals, solvents and oils and its highly advanced thermoplastics will not shrink. With the high quality and innovative design that you expect from a Viking Tactics product, the VTAC Light Mount will keep you in the light and out of the dark.
The new Surefire G2X body does not fit this light mount without some rigging.
SPECS: PVC alloy themoplastic, Black, Coyote Tan, or Flat Dark Earth. 1½" (3.8cm) long, 2½" (6.3cm) wide, 1¼" (3.2cm) high. 1.8 oz. (51g) weight. Fits .800" with spacer or 1" adaptable to the two different diameters.
The Arisaka Inline Scout Mount makes replacing the clumsy Picatinny mount on your Surefire M300 or M600, Arisaka 300 and 600 series lights, and Streamlight Protac Rail Mount 1 and 2 lights a snap.
The Inline Scout Mount uses the factory attachment points on the light body and keeps the light body only 0.2” above the mounting surface for the tightest possible fit.
Arisaka also built a side to side adjustment of up to 0.12” from center to help you clear other accessories and get the light into the most optimal position possible.
Arisaka’s new version of the Inline Scout Mount for KeyMod is made from stronger 7075 aluminum and uses BCM’s inverted KeyMod screws with twin recoil lugs giving you the most secure fit.
Designed especially for the M300 and M600 Surefire Scout lights, the Arisaka Offset Scout Mount for KeyMod is perfect for mounting a light at the 45-degree position. The mount is also compatible with the Arisaka 300 and 600 series lights as well as the Streamlight Protac Rail Mount 1, 2, and HL-X lights. The mount replaces the factory Picatinny adaptor with a low profile offset mounting option.
The Arisaka Offset Scout Mount uses BMC’s patented inverted KeyMod screws to keep the mount to a very manageable 0.20” thick.
The ultra slim Offset Scout Mount also features three lateral positions that allow up to a 0.24” mounting position from the center of the mount to clear accessories or back up iron sights.
Designed for use with all M-LOK mounting surfaces, the M-LOK Aluminum Cantilever Rail/Light Mount allows the attachment of various MIL-STD-1913 Picatinny spec rail-mounted accessories such as lights and optics, and directly interfaces with the popular Surefire M300/M600 series Scout Lights or Magpul Light Mount V-Block and Rings. The Cantilever Rail/Light Mount has Picatinny slots that extend forward .75”-1.5” past its mounting slot to improve ergonomics and optimize accessory positioning in a wide variety of uses, while keeping lights and accessories low to reduce the weapon’s profile.
Machined from milspec-anodized aluminum, the Cantilever Rail/Light Mount also feature beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
SPECS: Made in U.S.A. 3 Slots, max overall length of 3.15”.
The M-LOK Offset Light/Optic Mount, Aluminum provides the user with an ambidextrous platform to mount weapons lights or optics at both the 11 and 1 o’clock positions on M-LOK compatible hand guards. This mounting solution is constructed of Mil-Spec anodized aluminum and has beveled ends and corners to prevent snagging. The Offset Light/Optic Mount allows for the direct attachment of the Surfire M300/600 Series Scout Light or other MIL-STD-1913 Picatinny mounts. The optional Magpul Light Mount V-Block and Rings can also be used to attach hand held lights with a diameter from .75” to 1.03”.
Solidly clamps to either side of an AR-15, front sight base. Features two Picatinny rails for holding lights, lasers, sling adapters and other accessories. Machined for a secure fit so it won't rotate or twist out of alignment.
Rigid, aluminum, tri-rail mount lets you attach picatinny accessories such as lights, lasers, and other tactical equipment to your shotgun. Installs on the magazine tube without modifications to the gun, and will hold up to three attachments. Low mounting point keeps lights and lasers in proper alignment with the shot pattern and prevents interference with iron sights. Secures with two 8⁄32" clamping screws. Models for most popular brands of tactical shotguns.
Low-profile accessory mount attaches to underside of receiver in front of triggerguard for ultra-secure mounting of tactical lights and laser aiming devices. Gets light/laser close to the bore axis for accurate aiming, with controls in easy reach of support hand. Four precision machined slots accept any accessory designed to fit a MIL-STD 1913 Picatinny rail. Beveled and dehorned for snag-free operation; extends only ¼" below frame to allow easy fit in any holster designed for use with light/laser-equipped pistols. Available in blued carbon steel, matte gray stainless steel, or extremely lightweight aluminum with matte black anodized finish. Mounts using three super-strong, heat-hardened hex-head screws; drilling and tapping of frame required.